64 elements in 8×8 square array configuration
Thermopile-type Infrared Array Sensor Module
Such as temperature detection of object that require to be detected with high accuracy

-20～100

5.0

• COB

A/B phase analog output, Resolution 20um
Noise-resistant differential output
Output frequency 100KHz

-20～60

3.13~5.25(SWV=H)
4.75~5.25(SWV=L or H)

• CM

A/B phase analog output, Resolution 20um
Noise-resistant differential output
Output frequency is 100KHz
Digital index signal Z output
APC Function :LED brightness auto power control function to reduce variation in analog output signal amplitude

-30～85

3.13～5.25

• CM

A/B phase digital output, resolution 80um and digital index signal Z output
Interpolation circuit(1x,2x & 4x)：Output frequency can be changed to 60/120/240KHz
APC Function :LED brightness auto power control function to reduce variation in analog output signal amplitude

-20～85

4.5～5.5

• CM

【SME-08BD0】
A/B analog outputs, resolution 80um & digital index signal Z output
Output frequency is 120KHz
【SME-08BD1~D3】
A/B digital outputs, resolution 80um & digital index signal Z output
Interpolation function(4x,8x&16x)：Output frequency also can be changed to 240/480/960KHz
【Common】
APC Function: LED brightness auto power control function to reduce variation in analog output signal amplitude

-40～85

3.0～3.6 (BD1～BD3 only)
4.5～5.5

• CM

Absolute output：51.2mm scale length, 100μm resolution(9-bit serial output), built-in decoder
Combination of absolute output data and incremental output data will allow to reach higher resolution

-30～70

2.7～3.3

• CM