NPC SEIKO NPC CORPORATION
Search
Keyword Search
Part Number Search
Search Help
Products
Products Info
Video
Clock Generator
Sensor
Audio
Power Supply / Driver
Crystal Oscillator
Communication
Timepiece
Melody
Other
Datasheet Update
   Information
[Download]
Datasheet
Distributors
Package Information
Precautions
Inquiries about products
Contact Us Site Map
HOME
HOME>Products>SM8134A
Product Information
Power Supply / Driver
SM8134A
White LED Driver IC
Description

The SM8134A is a charge pump type white LED driver. It can drive 1 to 4 backlight white LED connected in parallel and 1 flash white LED, making the device ideal for camera-equipped cellular phones. The charge pump switches between ×1 to ×1.5 boost mode in response to LED drive current requirements to extend battery life to the maximum. The boost switching occurs in response to the drive current of all the connected LED and thus supports variations in LED forward-bias voltage drop (VF). Each LED drive current is controlled by a 5-channel LED drive current control circuit. The backlight LED drive current and ON/OFF control, and flash LED drive current and ON/OFF control are all set by 3-wire serial interface data input. Also, an under voltage lockout (UVLO) circuit is built-in to prevent incorrect operation when the battery voltage drops.

Block Diagram
8134block.gif
Features
· Noise reduction due to charge pump boost circuit
· Automatic charge pump switching to conserve power
· Drives 1 to 4 backlight white LED (30mA/ch at maximum setting)
· Drives a flash white LED (150mA at maximum setting)
· Backlight and flash white LED brightness adjustment
· 3-wire serial input interface for all setting and control
· Under voltage lockout (UVLO) circuit built-in
· Soft start circuit built-in
· Thermal protection circuit built-in
· Input voltage range
No-load current (IOUT = 0mA): 2.7 to 4.6V
Load current (IOUT = 80mA): 3.0 to 4.6V
Load current (IOUT = 180mA): 3.3 to 4.6V
Load current (IOUT = 200mA): 3.4 to 4.6V
· Quiescent current
Not -switching (×1.0 mode): 0.3mA (typ)
Switching (×1.5 mode): 1.7mA (typ)
· Standby current: 0.01µA (typ)
· Operating frequency: 750kHz (typ)
· Maximum backlight LED current: 30mA/ch
· Maximum flash LED current: 150mA
· All LED total maximum current: 200mA
· Backlight LED current matching (ILED = 20mA): ±3%
· Flash LED current accuracy (ILED = 150mA): ±6.7%
· Package: QFN-16-030030-1
Applications
·Cellular phone
·Digital still camera
·PDA
·Portable games
Further Details
PDF Datasheet(PDF 143KB)
BACK
PAGE TOP
 Copyright 1997-2006 Seiko NPC Corporation All rights reserved. | Legal | Privacy Policy |
Japanese site