|
|
|
5015 series
2.5V Operation Fundamental Frequency Crystal Oscillator Module ICs
The 5015 series are 2.5V operation crystal oscillator ICs. They are available for frequencies up to 60MHz. The product lineup consists of ALx series for 2.5V exclusive use and BLx series compliant with 2.5V to 5V. The built-in oscillator capacitor of ALx series is large, so that ALx series contribute to improve the frequencystability. For the BLx series, the current consumption and drive level reduced so that they can realize the characteristics easier to design small-sized crystal oscillators. The oscillator circuit of each version is simply constructed, so that it can realize the crystal oscillator with excellent phase noise characteristics. Even if the valued characteristics differ due to the application or the purpose, the selecting from these series for different purposes allows the optimization. INHN = Low active
| · |
Operating supply voltage range
5015ALx : 2.25 to 2.75V
5015BLx : 2.25 to 5.5V |
| · |
Up to 60MHz operating frequency range |
| · |
- 40 to 85°C operating temperature range |
| · |
Oscillator capacitors built-in
5015ALx : CG = 18pF, CD = 18pF
5015BLx : CG = 4pF, CD = 8pF |
| · |
Inverter amplifier feedback resistor built-in |
| · |
Standby function
High impedance in standby mode, oscillator stops |
| · |
Low standby current
Power-save pull-up resistor built-in |
| · |
fO, fO/2, fO/4, fO/8, or fO/16 output frequency, determined by internal connection |
| · |
CMOS output |
| · |
Molybdenum-gate CMOS process |
| · |
Package:Chip form |
|
|
Datasheet(PDF 98KB)
